JVC BR-DV6000U - Manual (Page 45)

E-74
DC IN MODE
INDEX WRITE
REPLICATION
REPLICATE
DELAY
OPERATION
LOCK
PB/DV IN
FACTORY
SETTING
DRUM HOUR
METER
PAGE BACK
ⅷ OPE OFF
OPE ON
OFF
ⅷ ON
ⅷ OFF
SERIAL
DV
ⅷ OFF
1SEC
2SEC
3SEC
4SEC
5SEC
ⅷ OFF
ON
ⅷ PAL
NTSC
ⅷ CANCEL
EXECUTE
Item Setting Description
Ⅵ SYSTEM (2/2) Menu
MENU SCREENS – Description of the Menu screens – (continued)
For selecting the action to perform when the power is supplied to the DC IN
terminal.:
OPE OFF
: Sets BR-DV6000 to the OPERATE OFF mode.
OPE ON : Sets BR-DV6000 to the OPERATE ON mode.
Memo
When the TIMER switch is set to REC or PLAY, the OPERATE ON mode
becomes effective regardless of the setting of this item.
For enabling/disabling index signal recording.
OFF
: No index signal
ON : Select here to record index signals.
It records an index signal automatically at the position
where recording starts.
For enabling /disabling output of REC commands from the SERIAL REMOTE
OUT terminal or the DV terminal when BR-DV6000 is set to the PLAYBACK
mode.
OFF
: No output
SERIAL : Outputs from the SERIAL REMOTE OUT terminal. Use
this setting when the SERIAL REMOTE OUT terminal is
used for dubbing by another machine.
DV : Outputs from the DV terminal. Use this setting when the
DV terminal is used for dubbing by another machine.
Memo
This item cannot be set to DV when BACKUP REC TIME in the SYSTEM (1/
2) Menu screen is set to other than OFF.
With this item set to DV, BACKUP REC TIME is fixed to OFF.
For setting the output timing of the REC command from the SERIAL RE-
MOTE OUT terminal or the DV terminal when BR-DV6000 is set to the PLAY-
BACK mode.
OFF
: Outputs when the unit is set to the PLAYBACK mode.
1SEC - 5SEC : Delays output timing by the set time (seconds).
For enabling/disabling operation lock.
OFF
: Turns off operation lock and the operation buttons of BR-
DV6000 can be used.
ON : Turns on operation lock. The operation buttons and slide
switches of BR-DV6000 are disabled except the OPER-
ATE ON button and MENU operation. (
☞ Page 37)
Set this menu according to the DV input signal and the signal format of the
tape to be played.
PAL
: Select here when the signal format is PAL.
NTSC : Select here when NTSC signals are input to the DV termi-
nal or when a tape with NTSC signals recorded is played.
Memo
• With this menu set to NTSC, analog signals cannot be recorded.
• If the setting is changed, images cannot be produced properly for a while
after the change.
• Signal formats cannot be converted.
• If this item is set to NTSC, BR-DV6000 cannot be used as the player or
recorder of an editing system.
For enabling /disabling the factory setting for the Menu screens.
CANCEL
: Disable the factory setting
EXECUTE : Enable the factory setting
For displaying the time of drum usage.
* The cursor cannot be brought to this item.
For returning to the SYSTEM (1/2) Menu screen.
74
DC IN MODE
INDEX WRITE
REPLICATION
REPLICATE
DELAY
OPERATION
LOCK
PB/DV IN
FACTORY
SETTING
DRUM HOUR
METER
PAGE BACK
ⅷ OPE OFF
OPE ON
OFF
ⅷ ON
ⅷ OFF
SERIAL
DV
ⅷ OFF
1SEC
2SEC
3SEC
4SEC
5SEC
ⅷ OFF
ON
PAL
ⅷ NTSC
ⅷ CANCEL
EXECUTE
Item Setting Description
Ⅵ SYSTEM (2/2) Menu
MENU SCREENS – Description of the Menu screens – (continued)
For selecting the action to perform when the power is supplied to the
DC IN terminal.:
OPE OFF
: Sets BR-DV6000 to the OPERATE OFF mode.
OPE ON : Sets BR-DV6000 to the OPERATE ON mode.
Memo
When the TIMER switch is set to REC or PLAY, the OPERATE ON
mode becomes effective regardless of the setting of this item.
For enabling/disabling index signal recording.
OFF
: No index signal
ON : Select here to record index signals.
It records an index signal automatically at the posi-
tion where recording starts.
For enabling /disabling output of REC commands from the SERIAL
REMOTE OUT terminal or the DV terminal when BR-DV6000 is set
to the PLAYBACK mode.
OFF
: No output
SERIAL : Outputs from the SERIAL REMOTE OUT terminal.
Use this setting when the SERIAL REMOTE OUT
terminal is used for dubbing by another machine.
DV : Outputs from the DV terminal. Use this setting when
the DV terminal is used for dubbing by another ma-
chine.
Memo
This item cannot be set to DV when BACKUP REC TIME in the SYS-
TEM (1/2) Menu screen is set to other than OFF.
With this item set to DV, BACKUP REC TIME is fixed to OFF.
For setting the output timing of the REC command from the SERIAL
REMOTE OUT terminal or the DV terminal when BR-DV6000 is set
to the PLAYBACK mode.
OFF
: Outputs when the unit is set to the PLAYBACK mode.
1SEC - 5SEC : Delays output timing by the set time (seconds).
For enabling/disabling operation lock.
OFF
: Turns off operation lock and the operation buttons of
BR-DV6000 can be used.
ON : Turns on operation lock. The operation buttons and
slide switches of BR-DV6000 are disabled except the
OPERATE ON button and MENU operation.
(
☞ Page 37)
Set this menu according to the DV input signal and the signal format
of the tape to be played.
NTSC
: Select here when the signal format is NTSC.
PAL : Select here when PAL signals are input to the DV
terminal or when a tape with PAL signals recorded is
played.
Memo
• With this menu set to PAL, analog signals cannot be recorded.
• If the setting is changed, images cannot be produced properly for a
while after the change.
• Signal formats cannot be converted.
• If this item is set to PAL, BR-DV6000 cannot be used as the player
or recorder of an editing system.
For enabling /disabling the factory setting for the Menu screens.
CANCEL
: Disable the factory setting
EXECUTE : Enable the factory setting
For displaying the time of drum usage.
* The cursor cannot be brought to this item.
For returning to the SYSTEM (1/2) Menu screen.
E U