JVC UX-F70MD - Manual (Page 59)

– 54 –
English
3
Press
= or + to change the title entry mode.
• Disc title and track title entry screen: Each time
you press the button, the title entry mode changes as
follows:
• Group title entry screen: Each time you press the
button, the title entry mode changes as follows:
• “GR-- TITLE?” appears on the display when the
current track is not included in any group.
4
Press SET to enter the selected title entry mode.
5
Input a character.
1) Press DISPLAY/CHARA to select the character
set you want.
• Each time you press the button, the character set
is selected in sequence as follows:
2) Press the character entry button for a character
you want to input.
Ex.:
• To input an “A” or “a,” press ABC once.
To input a “B” or “b,” press ABC twice.
To input a “C” or “c,” press ABC three times.
• To input a symbol, press MARK repeatedly
until the mark you want appears.
• To input a numeral, press 0 – 9.
• To enter a space while entering a title, press
=
twice.
• To move the character entry position while
entering a title, press
= or +.
• If you have entered an incorrect character, press
CANCEL to cancel the last entry.
Assigning the Disc Title, Track Title and
Group Title
You can assign a name to each MD, to each track and to
each group using alphabetic characters (uppercase and
lowercase), symbols and numerals. Once a title is assigned,
it is displayed for your confirmation.
About the number of characters inputted for an MD
The total number of characters that can be input for an MD is
1792. The maximum number that can be input for a disc title
is 64, and for each track, 61. (However, the actual number
you can input may be slightly less than this maximum
numbers due to the MD limitations — see page 63.)
• A space can be counted as one character.
• When the stereo long-hour recording (LP2 or LP4, see
page 31) method is used for recording, the maximum
number you can input for a track title automatically
reduced since “LP:” and four spaces are automatically
added to the beginning of the track title. Consequently this
reduces the total number of characters you can input for an
MD.
• You can input up to 10 characters for each track if an MD
is composed of 120 tracks recorded using the stereo long-
hour recording method.
In the following example, the process is explained from the
very first — that is, inserting a disc. If you have already
started recording or playing, start from step 2.
• To exit from the title entry screen any time during
process, press MD TITLE INPUT/EDIT.
1
Insert an MD to edit.
2
Press MD TITLE INPUT/EDIT.
The source is changes to “MD.”
The MD recorder enters one of the following title entry
screen.
• Disc title entry screen: appears when you press
MD TITLE INPUT/EDIT while the MD recorder
stops.
• Track title entry screen: appears when you press
MD TITLE INPUT/EDIT while playing, pausing or
recording.
• Group title entry screen: appears when you press
MD TITLE INPUT/EDIT while pressing MD
GROUP.
DISC TITLE? 1 TITLE?
••••
2 TITLE?
3 TITLE? Last track
GR 1 TITLE? GR 2 TITLE?
•••• GR 3 TITLE? Last group
Capital letters
& Symbols
Small letters
& Symbols
Numerals
Ex. When assigning a disc title.
Continued
EN53-55UX-F70MD[UB]_f 01.7.10, 5:22 PM 54