JVC UX-F70MD - Manual (Page 38)

– 33 –
English
On the main unit ONLY:
1
Insert a recordable MD into the MD loading slot.
• If the MD playback starts, press
7 to stop it.
2
Prepare a source tape.
After inserting a tape, press TAPE
2 3, then 7 before
going to the next step.
3
Press MODE select to select a recording mode
(MODE 1/6 – MODE 6/6) you want.
4
Press REC start.
Both the tape play and the recording start.
After the recording, both the cassette deck and the MD
recorder stop automatically.
To stop recording, press
7.
“UTOCwriting” appears on the display for a while.
To put a track mark manually while recording, press
SET on the remote control at the place you want.
To check the remaining time while recording tape
onto an MD
On the remote control ONLY:
Press DISPLAY/CHARA.
• Each time you press the button, the recording
indications, remaining time, the current track number of
the MD, and clock time appear in sequence.
MODE 1/6 SP NORMAL SPEED REC
MODE 2/6 SP NORMAL SPEED REC
MODE 3/6 LP2 NORMAL SPEED REC
MODE 4/6 LP2 NORMAL SPEED REC
MODE 5/6 LP4 NORMAL SPEED REC
MODE 6/6 LP4 NORMAL SPEED REC
Recording
length mode
Recording Speed
Recording
mode
Reverse
Mode
4
Press REC start.
Both the CD play and the recording start.
After the recording, both the CD player and the MD
recorder stop automatically.
To stop recording, press
7.
“UTOCwriting” appears on the display for a while.
To record a single track during play or pause
While playing back or pausing a CD track you want to
record, perform steps 3 and 4.
The playback of that CD track is stopped, and the same
track starts playing from the beginning again. This time,
the MD recorder starts recording the CD track.
• After the track is recorded, both the CD player and the
MD recorder stop automatically.
To check the remaining time while recording CD
onto an MD
On the remote control ONLY:
Press DISPLAY/CHARA.
• Each time you press the button, the recording
indications, remaining time, the current track number of
the CD and the MD, and clock time appear in sequence.
When you want to record on both an MD and a tape
See “Recording CD onto an MD and a Tape — CD Synchronized
Recording” on page 39.
Ex.: When recording with MODE 3/6
Recording Tape — Tape Synchronized
Recording
You have six methods (MODE 1/6 – 6/6) to record from a
tape onto an MD.
Using these synchronized recording methods, you can start
and stop tape play and MD recording at the same time.
EN29-39UX-F70MD[UB]_f 01.7.10, 2:59 PM 33