English, Playing at random — random play, Playing tracks in a group — group play – JVC UX-F70MD User Manual
Page 30
– 25 –
English
To check the program contents
Before playing, you can check the program contents by
pressing
4 or ¢.
•
4 : Shows the programed tracks in the reverse order.
•
¢ : Shows the tracks in the programed order.
To modify the program
Before or after playing, you can erase the last programed
track by pressing CANCEL. Each time you press the
button, the last programed track is erased from the
program.
To add tracks in the program before you start play,
press the number buttons to select track numbers you want
to add.
To erase the entire program, press MD open/close
0 to
eject the MD.
• Turning off the unit will also erase the program.
I
f you try to program a 33rd step
“MEMORY FULL” will appear on the display.
If your entry is ignored
You have tried to program a track number that does not exist on the
MD (for example, selecting track 14 on an MD that only has 12
tracks.) Such entries are ignored.
If the total playing time is 150 minutes (2 hours and
30 minutes) or more
The total playing time will not be shown.
Playing at Random — Random Play
The tracks of the loaded MD will play at random.
On the remote control ONLY:
1
Insert an MD.
2
Press MD
3 / 8, then 7.
The source is changed to “MD.”
3
Press PLAY MODE repeatedly until “RANDOM”
appears on the display.
• Each time you press the button, play mode changes
as follows:
4
Press MD
3 / 8.
The tracks are played at random.
Random play stops when all the tracks are played once.
To stop during play, press
7.
To skip the current track, press
¢.
• You cannot go back to the previous tracks by pressing
4.
To exit from Random play mode, press PLAY MODE
repeatedly so that the unit enters another playback mode
before or after play.
Playing Tracks in a Group — Group Play
You can playback the tracks in the same group.
To make a group etc., see pages 40 to 47.
On the remote control ONLY:
1
Insert an MD.
2
Press MD
3 / 8, then 7.
The source is changed to “MD.”
3
Press PLAY MODE repeatedly until “GROUP”
appears on the display.
• Each time you press the button, play mode changes
as follows:
4
Press
4 or ¢ while pressing MD GROUP to
select a group.
PROGRAM
RANDOM
Normal play
GROUP
(Program play)
(Random play)
(Group play)
The current track
Play mode
Recording
length mode
Group No. of
the track
Elapsed
playing time
MD indicator
PROGRAM
RANDOM
Normal play
GROUP
(Program play)
(Random play)
(Group play)
EN22-28UX-F70MD[UB]_f
01.7.10, 3:00 PM
25