JVC UX-F70MD - Manual (Page 16)

– 11 –
English
Turning On the Power
When you press the play buttons (CD
3 / 8, MD 3 / 8,
TAPE
2 3) for a particular source or the FM/AM/AUX
button (or FM/AM or AUX button on the main unit), the
unit automatically turns on (and starts playback if the
source is ready).
To turn on the unit without playing, press
STANDBY/ON.
The STANDBY/ON lamp on the electronic swing panel
lights green.
To turn off the unit (on standby), press
STANDBY/ON again.
The STANDBY/ON lamp on the electronic swing panel
lights red.
• “0:00” appears on the display until you set the
built-in clock. After setting the clock, the clock time will
appear on the display while the unit is turned off (on
standby.)
• A little power is always consumed even while the unit is
on standby.
To set the built-in clock, see page 57.
To switch off the power supply completely, unplug the
AC power cord from the AC outlet.
When you unplug the AC power cord or if a power
failure occurs
The clock setting, the tuner preset stations and other settings will
be erased.
Selecting the Sources and Starting Play
To select the tuner or external equipment, press
FM/AM/AUX.
The unit automatically turns on (when the unit is on
standby) and the last selected source appears on the display.
• Each time you press the button, the sources change as
follows:
• When you change the source from the others, “TUNER”
appears for a while.
• For more detailed tuner operations, see pages 14 to 16.
• For operating the external equipment, see the manuals
supplied with them.
When using the main unit:
• Press FM/AM to select the tuner.
– Each time you press the button, the band alternates
between FM and AM.
• Press AUX to select the external equipment.
To select the CD player, press CD
3 / 8.
The unit automatically turns on (when the unit is on
standby), and “CD” appears on the display. Play will start if
a CD is on the disc tray. (“NO DISC” will appear on the
display if a CD is not loaded.)
To stop playback, press
7.
• For more detailed operations, see pages 17 to 21.
To select the MD player, press MD
3 / 8.
The unit automatically turns on (when the unit is on
standby), and “MD” appears on the display. Play will start
if an MD is in the MD loading slot. (“NO DISC” will
appear on the display if an MD is not loaded.)
To stop playback, press
7.
• For more detailed operations, see pages 22 to 26.
To select the tape, press TAPE
2 3.
The unit automatically turns on (when the unit is on
standby), and “TAPE” appears on the display. Play will
start if a tape is in the cassette holder. (“NO TAPE” will
appear on the display if a tape is not in the cassette holder.)
To stop playback, press
7.
• For more detailed operations, see pages 27 and 28.
FM AM
AUX
(TUNER)
EN10-13UX-F70MD[UB]_f 01.7.10, 2:57 PM 11