JVC UX-F70MD - Manual (Page 21)

– 16 –
English
3
Press the number buttons to select a preset number.
Ex. For preset number 5, press 5.
For preset number 15, press +10, then 5.
For preset number 20, press +10, then 10.
For preset number 30, press +10, +10, then 10.
• You can also select the preset number by pressing
¢ or 4.
4
Press SET again.
“STORED” appears on the display for a while.
The tuned station in step 1 is stored in the preset
number selected in step 3.
• Storing a new station on a used number erases the
previously stored one.
When you unplug the AC power cord or if a power
failure occurs
The preset stations will be erased. If this happens, preset the
stations again.
Tuning in a Preset Station
On the remote control ONLY:
1
Press FM/AM/AUX repeatedly to select “FM” or
“AM.”
The unit automatically turns on with the last source
selected.
• Each time you press the button, the source changes as
follows:
2
Press the number buttons to select a preset number.
Ex. For preset number 5, press 5.
For preset number 15, press +10, then 5.
For preset number 20, press +10, then 10.
For preset number 30, press +10, +10, then 10.
FM AM
AUX
(TUNER)
To check the clock time while listening to the tuner
On the remote control ONLY:
Press DISPLAY/CHARA.
• Each time you press the button, the source indications
and the clock time alternate on the display.
EN14-16UX-F70MD[UB]_f 01.7.10, 2:57 PM 16