JVC UX-F70MD User Manual

Page 57

– 52 –

English

Erasing Tracks — ERASE

This function allows you to erase an unwanted track.
Once tracks are erased, the other tracks and/or groups are
renumbered.
• To stop any time during editing process, press

MD TITLE INPUT/EDIT.

On the remote control ONLY:

Insert an MD to edit.

Press MD TITLE INPUT/EDIT repeatedly until
“ERASE?” appears on the display.
The source changes to “MD.”

• Each time you press MD TITLE INPUT/EDIT, the

edit mode changes as follows:

• If you want to stop this editing process, press CANCEL.

Press SET.

• During playback:

The current track number starts flashing.

Select a track you want to erase.
1) Press

¢ or 4.

• You can select the track using number buttons. In

this case, the selected track starts playback repeatedly.

• During playback:

The selected track starts playback repeatedly.

2) Press SET.

Repeat step 4 to select all the tracks you want to erase.
• To cancel, press CANCEL.

Press ENTER.
“” appears on the display.

Press ENTER again to finish the editing procedure.
“EDITING” then “UTOCwriting” appears on the
display while the editing you have made is being
recorded on the MD.

Erasing All Tracks — ALL ERASE

This function allows you to erase all the tracks on an MD.

On the remote control ONLY:

Insert an MD to edit.

Press MD TITLE INPUT/EDIT repeatedly until
“ALL ERASE?” appears on the display.
The source changes to “MD.”

• Each time you press MD TITLE INPUT/EDIT, the

edit mode changes as follows:

• If you want to stop this editing process, press CANCEL.

Press SET.
“” appears on the display.
• To cancel the setting, press MD TITLE INPUT/EDIT.

Press ENTER to finish the editing procedure.
“EDITING” then “UTOCwriting” appears on the
display while the editing you have made is being
recorded on the MD.
• “BLANK DISC” appears on the display after all track

an erased.

Ex. Track 2 is selected.

DISC TITLE?

MOVE ?

ERASE?

DIVIDE ?

JOIN ?

ALL ERASE?

Canceled