beautypg.com

Questions and answers, Troubleshooting (cont.) – JVC SR-VD400E User Manual

Page 52

background image

52

EN

Questions and answers

RECORDING
Q. When I pause and then resume a recording, the end

of the recording before the pause is overlapped by
the new recording. Why does this happen?

A. This is normal. It reduces distortion at the pause and

resume points.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Q. Can the VCR indefinitely remain in the recording

pause mode?

A. No. The VCR automatically stops after 5 minutes to

protect the heads. When paused during Instant Timer
Recording (ITR), the VCR shuts off automatically after
5 minutes.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Q. What happens if the tape reaches its end during

recording?

A. The VCR stops, then [Q] and [

#] blink on the front

display panel.

PLAYBACK
Q. What happens if the tape reaches its end during

playback or search?

A. The VCR automatically rewinds it to the beginning.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Q. Can the VCR indefinitely remain in still mode?
A.
No. It stops automatically after 5 minutes to protect

the heads.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Q. During picture search, still picture playback and

frame-by-frame playback, the picture is intermittent.
What’s the cause?

A. Picture loss occurs when these types of playback are

attempted with a tape recorded in LP mode. Pressing
[PLAY (

3 )] to return to normal playback will restore

the picture.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Q. When returning from variable-speed picture search

to normal playback, the picture is disturbed. Should
I be concerned about this?

A. No, it is normal.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Q. Other than preventing further recording, what

effect does removing the safety tab have?

A. It disables marking of index codes and tape numbers

for Video Navigation.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Q. Sometimes, during index search, the VCR cannot

find the program I want to see. Why not?

A. There may be index codes too close together.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Q. During playback, on-screen display sometimes

jitters. Why does this happen?

A. If the condition of the tape being played back is not

good, jittering of the video (including on-screen
display) may occur.

TROUBLESHOOTING (cont.)