beautypg.com

Selecting monitor sound, Adjusting tracking condition – JVC SR-VD400E User Manual

Page 10

background image

10

EN

Selecting monitor sound

— Audio Monitor

You can select the desired monitor sound.

While playing back a tape on which stereo sound is
recorded, press [A. MONITOR] on the Remote.
Each time you press the button, the sound changes as
follows:

C

D

Adjusting tracking condition

— Tracking Adjustments

Automatic tracking adjustment

This VCR automatically adjusts the tracking condition.
Whenever you insert a tape and start playback, automatic
tracking starts working and continuously analyzes the signal
to enable optimum picture quality during playback.

Manual tracking adjustment

If automatic tracking cannot eliminate noises well during
playback, use the manual tracking following the procedures
below.
● You can also use the manual tracking during slow motion

playback (

੬ page 15). During slow motion playback,

simply press [CHANNEL +] or [–] on the VCR (or [TV/
VCR CH +] or [–] on the Remote) to adjust tracking.

1

Activate manual tracking

Press [CHANNEL +] and [–] on the front panel at
the same time during playback.

2

Eliminate the noises on the TV screen

Press [CHANNEL +] or [–].
● Press it briefly for a fine adjustment, or press and

hold for a coarse adjustment. Watch the screen
and continue adjustment until optimum picture
and sound quality are achieved.

● To reactivate automatic tracking, press

[CHANNEL +] and [–] on the front panel at the
same time. The automatic tracking becomes
active again.

NORMAL

MIX

L R

L

R

L R

L

R

NOTES:

The above indication appears when “SUPERIMPOSE” is set to
“ON” (

page 39), though the monitor sound changes in

sequence.

If the tape being played back has no Hi-Fi sound track, the normal
sound track will be heard regardless of this setting.

“ L R ” : Normally select this.
“ L”

: Sound on the left channel is played back.

“R ”

: Sound on the right channel is played back.

“ L R ” : Normally select this.

Hi-Fi sound is played back.

“ L”

: Sound on the left Hi-Fi channel is played

back.

“R ”

: Sound on the right Hi-Fi channel is played

back.

“NORMAL” : Sound on the normal track is played back.
“MIX”

: Both sounds on the Hi-Fi track and normal

track are mixed and played back.

S-VHS/VHS

D-VHS

PLAYBACK (cont.)