JVC SR-VD400E - Manual (Page 35)

EN
35
VCR
TV
CABLE
/DBS
2
-
5
1 6
[BACK]
FUNCTION SET UP INITIAL SET UP
THEN PRESS [OK]
V. CALIBRATION
PICTURE CONTROL AUTO
ON
ON DIGITAL R3
VIDEO STABILIZER
VIDEO FUNCTION AUDIO FUNCTION IN/OUT FUNCTION ADDITIONAL
SELECT WITH ARROW KEYS
SELECT
OK
EXIT
MENU
OFF
FUNCTION SET UP INITIAL SET UP
THEN PRESS [OK]
V. CALIBRATION
PICTURE CONTROL AUTO
ON
ON DIGITAL R3
VIDEO STABILIZER
VIDEO FUNCTION AUDIO FUNCTION IN/OUT FUNCTION ADDITIONAL
SELECT WITH ARROW KEYS
SELECT
OK
EXIT
MENU
OFF
FUNCTION SET UP INITIAL SET UP
THEN PRESS [OK]
V. CALIBRATION
PICTURE CONTROL AUTO
ON
ON DIGITAL R3
VIDEO STABILIZER
VIDEO FUNCTION AUDIO FUNCTION IN/OUT FUNCTION ADDITIONAL
SELECT WITH ARROW KEYS
SELECT
OK
EXIT
MENU
OFF
You can use the other useful function settings on the
Function Set Up screens by following the procedure
described below.
The table below shows the structure of the menu system.
● For the functions you can set on the Function Set Up
screen, see pages 35 to 41.
1 Access Main Menu screen
Press [MENU].
2 Access Function Set Up screen
Press [ @ #] to move
the arrow to
“FUNCTION SET
UP”, then press [
fi]
or [OK].
3 Select Function Menu
Press [ @ #] to move
the arrow to the
menu of the function
you want to set, then
press [
fi] or [OK].
4 Select Function
Press [ %fi] to move
the arrow to the
function you want to
set.
5 Change setting
Press [ @ #].
6 Return to normal screen
Press [MENU].
NOTE:
To go back to a previous screen during settings, press [BACK].
OTHER USEFUL FUNCTIONS
Useful Function
Settings
“FUNCTION
SET UP”
“VIDEO FUNCTION” ( ੬ page 36)
“AUDIO FUNCTION” ( ੬ page 37)
“IN/OUT FUNCTION” ( ੬ page 38)
“ADDITIONAL” ( ੬ page 39)
● Turn on the VCR and the TV, and select the AV mode
on the TV.
● Set the [VCR/TV/CABLE/DBS] selector on the Remote
to [VCR].