JVC SR-VD400E - Manual (Page 11)

EN
11
Locating beginning of recordings
— Index Search
When recording on this VCR, index codes are placed on
the tape at the beginning of each recording. You can find
and automatically play back from the beginning of any
recording using the Index Search function.
1
Start search
While the tape is not running, press [ 4] or [¢]
on the Remote.
2
Access distant code
To access a recording of 2 to 9 index codes away,
press [
4] or [¢] repeatedly until the correct
number is displayed on the screen (only if
“SUPERIMPOSE” is set to “ON” (
੬ page 39)).
Playback begins automatically when the desired
recording is located.
● If you want to find the very beginning of the
desired program, press [REW ( )] or
[FF ( )] after playback starts.
Other Useful functions for playback
(S-VHS/VHS only)
You can also use the following functions for playback.
● “V. CALIBRATION” (੬ page 36)
When this function is set to “ON”, this VCR checks the
condition of the tape in use during playback and recording,
and compensates to provide the highest-possible pictures.
● “PICTURE CONTROL” (੬ page 36)
This function helps you to adjust the playback picture quality
according to your preference.
● “DIGITAL R3” (੬ page 36)
This function applies edge correction to the luminance signal
to enhance details and provides clear pictures.
● “VIDEO STABILIZER” (੬ page 36)
You can automatically correct vertical vibrations in the picture
when playing back unstable recordings made on another VCR.
–1 1 2 –2 3
4 ¢
F
E
Skipping unwanted portions
— Skip Search
You can skip over (view at high speed) unwanted portions
of the tape.
Press [SKIP SEARCH] on the Remote once to 4 times during
playback.
Each press initiates a 30-second period of high speed
playback (up to 2 minutes). When the specified portion of
the tape is skipped, normal playback resumes automatically.
To return to normal playback during Skip Search, press
[PLAY (
3 )].
NOTE:
It is not possible to perform the Skip Search when you play back
a D-VHS tape recorded in LS5 mode.
Repeating wanted portions
— Skip Back
You can skip back (view at high speed) wanted portions of
the tape.
Press ‘Number’ key (1, 2 or 3) on the Remote during
playback.
Each press initiates specified portion period of high speed
rewind. When the specified portion of the tape is rewound,
normal playback resumes automatically.
Beginning of the 2nd
next program recorded Current position
on the tape Beginning of the current
program recorded
Next
program
recorded Previous
program
recorded
2nd next
Automatic operations after
rewinding
— Next Function Memory
The Next Function Memory tells the VCR what to do after
rewinding is complete.
● Ensure that the VCR is in stop mode.
a– For Automatic Playback Start
Press [REW ( 1 )], then press [PLAY ( 3 )] within 2
seconds.
b– For Automatic Power Off
Press [REW ( 1 )], then press [POWER] within 2
seconds.
NOTE:
An index code is not placed on the tape when recording is
resumed from recording pause.
Number key Rewind Time
1
2
3 about 05 seconds
about 10 seconds
about 30 seconds
G
H