JVC Network Pack SA-DV6000 - Manual (Page 26)

26
LAN connections
Wireless LAN
DHCP OFF
WLAN AD HOC MODE OFF
WLAN ESS ID abcdef
WLAN CH 2
IP ADDRESS 192. 168. 100. 102
SUBNET MASK 255. 255. 255. 000
DHCP OFF
WLAN AD HOC MODE OFF
WLAN ESS ID abcdef
WLAN CH 2
IP ADDRESS 192. 168. 100. 103
SUBNET MASK 255. 255. 255. 000
DHCP OFF
WLAN AD HOC MODE OFF
WLAN ESS ID abcdef
WLAN CH 2
IP ADDRESS 192. 168. 100. 104
SUBNET MASK 255. 255. 255. 000
IP ADDRESS 192. 168. 100. XXX
SUBNET MASK 255. 255. 255. 000
DHCP OFF
WLAN AD HOC MODE OFF
WLAN ESS ID abcdef
WLAN CH 2
IP ADDRESS 192. 168. 100. 101
SUBNET MASK 255. 255. 255. 000
PC wireless LAN driver settings
NetworkType
Infrastructure
ESS ID abcdef
Channel 2
Encryption Mode Open System
PROXY SERVER NO USE
DHCP SERVER NO USE
IP ADDRESS 192. 168. 100. 100
SUBNET MASK 255. 255. 255. 000
STATION
ESS ID abcdef
Encryption Mode Open System
BR-DV6000
PROFESSIONAL MENU RESET A.DUB
EJECT
COUNTER AUDIO INPUT SELECT MONITOR OUTPUT REMOTE
LOCAL
CTL L MIX R
CH-1/2 MIX CH-3/4
DV LINE Y/C (CPN)
TC
UB
REW STOP FF
REC
OPERATE
PLAY PAUSE DISP
SET SEARCH+
BLANK CUE UP HOLD
PHONES REC LEVEL
CH-1/3 CH-2/4
MIC
SEARCH–
Mini
Network Type (Ad Hoc/Infrastructure)
Make sure ESS ID and Channel settings
are the same.
Set a unique number to avoid doubling
Set the same domain
* For the PC settings when using a LAN card,
refer to the instruction manual included with
the LAN card.
\ Wireless Connections, Multiple Client PC to a Single VTR
SA-DV6000 allows up to a maximum of 10 clients to be connected at the same time via a network for viewing streaming data. If the
client is a media server or equivalent, more clients can view streaming data via the server. (The number of client connections allowed
differs depending on the server.)
A total of 10 clients can connect simultaneously, clients can be using Streamproducer and Windows media player to view the VTR’s
output.
Configure the VTR as follows:
● DHCP must be OFF.
● The WLAN AD HOC Mode must be OFF.
● The WLAN ESS ID, WLAN CH, and WEP encryption key must match the access point
● If clients will be connecting through an Intranet or the Internet, consult you IT department and request a IP address for the VTR.
● VTR and Client PC are set the same domain and different IP addresses.