Intel GA-N650SLI-DS4 - Manual (Page 41)

BIOS Setup - 41 -
English
2-3 Integrated Peripherals
SATA-II RAID Config
CMOS Setup Utility-Copyright (C) 1984-2007 Award Software
SATA-II RAID Config
Item Help
Menu Level SATA-II RAID function [Disabled]
x SATA-II 1 Primary RAID Enabled
x SATA-II 1 Secondary RAID Enabled
x SATA-II 2 Primary RAID Enabled
x SATA-II 2 Secondary RAID Enabled
: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
CMOS Setup Utility-Copyright (C) 1984-2007 Award Software
Integrated Peripherals
SATA-II RAID Config [Press Enter]
On-Chip IDE Channel0 [Enabled]
IDE DMA transfer access [Enabled]
On-Chip MAC Lan [Auto]
Onboard LAN Boot ROM [Disabled]
On-Chip IDE Channel1 [Enabled]
NV Serial-ATA Controller [All Enabled]
IDE Prefetch Mode [Enabled]
On-Chip USB [V1.1+V2.0]
USB Keyboard Support [Disabled]
USB Mouse Support [Disabled]
Onboard Audio Function [Auto]
SMART LAN [Press Enter]
Onboard 1394 [Enabled]
Legacy USB storage detect [Enabled]
Onboard Serial Port 1 [3F8/IRQ4]
Onboard Parallel Port [378/IRQ7]
Parallel Port Mode [SPP]
x ECP Mode Use DMA 3
: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Item Help
Menu Level
SATA-II RAID function
Enabled Allows users to configure individual SATA channels as RAID or ATA mode.
Disabled Disable the RAID function for all of the onboard SATA channels. (Default value)
SATA-II 1 Primary RAID
Enabled Enable RAID function for the first channel of the first SATA 3Gb/s controller.
(Default value)
Disabled Disable this function.
SATA-II 1 Secondary RAID
Enabled Enable RAID function for the second channel of the first SATA 3Gb/s controller.
(Default value)
Disabled Disable this function.