Intel GA-N650SLI-DS4 - Manual (Page 19)

Hardware Installation - 19 -
English
Graphics Card Driver Setting:
Step 1: After installing graphics card driver in operating system, right-
click the NVIDIA icon in your system tray and then select
NVIDIA Display. The NVIDIA control panel will appear.
Step 4: Plug the display cable into either one of the two graphics
cards for display output. If you plug the display cable into the
card on the PCIE_16_1 slot, make sure to set Init Display
First in BIOS Setup to PEG; if you plug the display cable
into the card on the PCIE_16_2 slot, set Init Display
First to PEG(Slot2).
Step 2: Select SLI multi-GPU from the side menu and then
select the Enable SLI multi-GPU checkbox in the SLI
multi-GPU dialog box. System will restart after you
click Apply. Then the SLI configuration is completed.
(Note) For more information about software configurations for SLI, refer to the user's manual for your
graphics card.