English, 2 advanced bios features, Hard disk boot priority – Intel GA-N650SLI-DS4 User Manual

Page 39: First / second / third boot device, Password check, Hdd s.m.a.r.t. capability

BIOS Setup

- 39 -

English

2-2

Advanced BIOS Features

Hard Disk Boot Priority

Select boot sequence for onboard(or add-on cards) SCSI, RAID, etc.
Use < > or < > to select a device, then press<+> to move it up, or <-> to move it down the list.
Press to exit this menu.

First / Second / Third Boot Device

Floppy

Select your boot device priority by Floppy.

LS120

Select your boot device priority by LS120.

Hard Disk

Select your boot device priority by Hard Disk.

CDROM

Select your boot device priority by CDROM.

ZIP

Select your boot device priority by ZIP.

USB-FDD

Select your boot device priority by USB-FDD.

USB-ZIP

Select your boot device priority by USB-ZIP.

USB-CDROM

Select your boot device priority by USB-CDROM.

USB-HDD

Select your boot device priority by USB-HDD.

Legacy LAN

Select your boot device priority by Legacy LAN.

Disabled

Disable this function.

Password Check

Setup

The system will boot but will not access to Setup page if the correct
password is not entered at the prompt. (Default value)

System

The system will not boot and will not access to Setup page if the correct
password is not entered at the prompt.

HDD S.M.A.R.T. Capability

This feature allows your hard disk to report read/write errors and to issue warnings when third-
party hardware monitor utility is installed.

Enabled

Enable HDD S.M.A.R.T. capability.

Disabled

Disable HDD S.M.A.R.T. capability. (Default value)

(Note) This item will show up when you install a processor that supports this function.

Advanced BIOS Features

Hard Disk Boot Priority

[Press Enter]

First Boot Device

[Floppy]

Second Boot Device

[Hard Disk]

Third Boot Device

[CDROM]

Password Check

[Setup]

HDD S.M.A.R.T. Capability

[Disabled]

CPU Hyper-Threading

(Note)

[Enabled]

Limit CPUID Max. to 3

(Note)

[Disabled]

No-Execute Memory Protect

(Note)

[Enabled]

CPU Enhanced Halt (C1E)

(Note)

[Enabled]

CPU Thermal Monitor 2(TM2)

(Note)

[Enabled]

CPU EIST Function

(Note)

[Enabled]

Virtualization Technology

(Note)

[Enabled]

Full Screen LOGO Show

[Enabled]

Robust Graphics Booster

[Disabled]

x VGA Core Clock

+1%

Init Display First

[PEG]

: Move

Enter: Select

+/-/PU/PD: Value

F10: Save

ESC: Exit

F1: General Help

F5: Previous Values

F6: Fail-Safe Defaults

F7: Optimized Defaults

Item Help
Menu Level