Intel GA-N650SLI-DS4 - Manual (Page 40)

GA-N650SLI-DS4 Motherboard - 40 -
English
CPU Hyper-Threading (Note)
Enabled Enable CPU Hyper Threading Feature. Please note that this feature is only
working for operating system with multi processors mode supported.
(Default value)
Disabled Disable CPU Hyper Threading.
Limit CPUID Max. to 3 (Note)
Enabled Limit CPUID Maximum value to 3 when use older OS like NT4.
Disabled Disable CPUID Limit for windows XP. (Default value)
No-Execute Memory Protect (Note)
Enabled Enable No-Execute Memory Protect function. (Default value)
Disabled Disable No-Execute Memory Protect function.
CPU Enhanced Halt (C1E) (Note)
Enabled Enable CPU Enhanced Halt (C1E) function. (Default value)
Disabled Disable CPU Enhanced Halt (C1E) function.
CPU Thermal Monitor 2 (TM2) (Note)
Enabled Enable CPU Thermal Monitor 2 (TM2) function. (Default value)
Disabled Disable CPU Thermal Monitor 2 (TM2) function.
CPU EIST Function (Note)
Enabled Enable CPU EIST function. (Default value)
Disabled Disable CPU EIST function.
Virtualization Technology (Note)
Enabled Enable Virtualization Technology function. (Default value)
Disabled Disable Virtualization Technology function.
Full Screen LOGO Show
Enabled Show full screen logo at system startup. (Default value)
Disabled Disable this function. If you wish to see BIOS POST screen, set this item to
"Disabled".
Robust Graphics Booster
The options can enhance the VGA graphics card bandwidth to get higher performance.
Disabled Disable this function. (Default value)
Enabled Enable the R.G.B. function.
VGA Core Clock
This option allows the user to alter the core clock for the graphics chip and is available only when
the Robust Graphics Booster option is set to Enabled.
Increase VGA core clock by 1%~50%.
Init Display First
This feature allows you to select the first initiation of the monitor display from which card when you
install a PCI card and a PCI Express VGA card on the motherboard.
PCI Set Init Display First to PCI VGA card.
PEG Set Init Display First to PCI Express VGA card (the PCIE_16_1 slot).
(Default value)
PEG(Slot2) Set Init Display First to PCI Express VGA card (the PCIE_16_2 slot).
(Note) This item will show up when you install a processor that supports this function.