Insignia NS-42 - Manual (Page 30)

30
Insignia NS-42LCD 42-inch LCD TV
www.insignia-products.com
3 Highlight Clock Setup, then press or to
enter the menu.
4 Highlight Auto Clock, then press or to
turn Auto Clock ON.
5 Highlight Set Time Zone, then press or
to select your viewing area time zone:
Atlantic, New Foundland, Samoa, Hawaii,
Alaska, Pacific, Mountain, Central, or
Eastern.
6 If your viewing area observes Daylight Saving
Time, set Observe Daylight Time to ON in
the menu
Setting the clock manually
If the current time setting is wrong, reset the
clock manually. If the TV loses power, the clock
is reset.
To manually set the clock:
1 Navigate to the SYSTEM SETUP menu, then
to the Clock Setup sub-menu.
2 Highlight Auto Clock, then press or to
select OFF.
3 Press or to highlight Current Time,
then press or to select either the year,
date, or time option.
4 Press the number buttons to set the year,
date, and time. To select AM or PM, move the
cursor to the appropriate position, then press
OK to toggle.
5 If your area observes Daylight Saving Time,
set Observe Daylight Time to ON in the
menu.
Setting the Auto On/Off timer
Auto Power On or Off only works if the current
time has been set. The TV must be in Standby
mode for Auto Power On to work.
To set the Auto On/Off timer:
1 Navigate to the SYSTEM SETUP menu, then
to the Clock Setup sub-menu.
2 Highlight Auto Power On or Auto Power
Off.
3 Press or to select either the hour or
minute.
4 Press the number buttons to change the
time. To select AM or PM, move the cursor to
the appropriate position, then press OK to
toggle.
• If you want the timer to work only today,
highlight Today, then press OK to activate
it (displayed in purple).
• If you want the timer to work every day,
select Everyday, then press OK to
activate it (displayed in purple).
• To cancel the timer, select Disable, then
press OK to activate it (displayed in
purple).
5 Press EXIT to return to TV viewing, or press
MENU to return to the previous menu.
Setting the Sleep timer
The Sleep timer lets you select the amount of
time before your TV turns off automatically. This
setting is cleared when the TV is turned off.
To set the Sleep timer:
1 Press the SLEEP button repeatedly to cycle
through the available times.
2 To cancel the timer, press SLEEP repeatedly
until OFF is selected.
Note
If the TV loses power, the time settings are
cleared.