Hard ware mon i toring sys tem 8, Irda port 8, Usb port 8 – Intel SBC-370 User Manual
Page 7: Isaplus 8, E2keyž 8, Watch dog timer 8, Flash disk - diskonchip ž 8, Atx power sup ply func tion 8, Power con sump tion 8
Hardware Monitoring System
•
Built-in LM78 hardware monitoring system
•
Monitors power supply voltage and fan speed status
IrDA Port
•
Supports Serial Infrared (SIR) and Amplitude Shift Keyed IR(ASKIR) interface
USB Port
•
Supports two USB ports for future expansion
ISAPLUS
•
Enhance the ISA bus drive capability
E2Key™
•
1Kbit EEPROM (nonvolatile memory)
•
Accepts read/write data by customer's program
•
Stores system ID, password, and critical data on the board
Watchdog Timer
•
Can be set by 1, 2, 10, 20, 110, or 220 second periods
•
Reset or NMI is generated when CPU does not periodically trigger the timer
•
Your program uses hex 043 and 443 to control the watchdog and generate a system reset
Flash Disk - DiskOnChip™
•
100% compatibility with hard disk
•
Supports M-Systems
•
Built-in True FFS Transparent Flash Block Management and Space Reclamation, which
allows the use of the Flash Disk with DOS command with no need for any extra software
utility
•
2 MB to 144 MB
ATX Power Supply Function
•
Connect to the backplanes and /or the ISBC card
Power Consumption
•
+5V/6.8A (Celeron 333 MHz, 512 MB SDRAM), +12V/170mA (maximum), -12V/60mA
(maximum)
Features
8