Ide , onboard 35, Ir du plex mode 35, Irda pro to col 35 – Intel SBC-370 User Manual
Page 33: Par al lel port dma chan nel 35, Par al lel port irq 35, Par al lel port mode 35, Par al lel port, onboard 35, Se rial port b mode 35
Serial Port B Mode >:
Specify the mode of serial port 2.
IR Duplex Mode >:
Specify the mode of IR device that is connected to the IR port.
IrDA Protocol >:
Specify the function mode if an IrDA mode is selected.
Onboard Parallel Port >:
Specify the I/O port address of the parallel port.
Parallel Port Mode >:
Used to specify the mode of parallel port. The options are:
• Normal
(normal parallel port mode)
• Bi-Dir
(supports bidirectional transfer)
• EPP
(supports devices that comply with the Enhanced Parallel Port specification)
• ECP
(supports devices that comply with the Extended Capabilities Port)
Parallel Port IRQ >:
This option is used to assign certain IRQ to the parallel port. The opti-
mal and fail-safe setting is 7.
Parallel Port DMA Channel >:
This function is available only if the parallel port mode is ECP.
The optimal and fail-safe setting is 3.
Onboard IDE >:
Define which onboard IDE controller channel(s) should be used. Avail-
able options are:
Primary
,
Secondary
,
Both
, and
Disabled
.
35
AMI BIOS Setup Menus