Insignia NS-19RTR - Manual (Page 45)

44
NS-19RTR 19" DVD Triple Combo
www.insignia-products.com
6 Use the number buttons to enter your access code (password),
then press the ENTER button. If you have not set up an access
code, enter any four numbers (except 4737).
7 Press the or button to select PARENTAL LEVEL , then press
the ENTER button.
8 Press the or button to select a rating level, then press the
ENTER button. You can select:
• 1 [KID SAFE]
• 2 [G]
• 3 [PG]
• 4 [PG13]
• 5 [PGR]
• 6[R]
• 7[NC-17]
• 8[ADULT]
• ALL–Turns off the parental lock.
9 Press the SETUP button.
Changing the access code (password)
To change your access code:
1 Make sure that your DVD combo is in DVD mode.
2 If a disc is playing, press the STOP
button.
3 Press the SETUP button twice.
4 Press the
or button to select CUSTOM , then press the
ENTER button.
5 Press the or button to select PARENTAL , then press the
ENTER button.
6 Use the number buttons to enter your old access code
(password), then press the ENTER button.
7 Press the or button to select PASSWORD CHANGE , then
press the ENTER button.
8 Use the number buttons to enter your new access code, then
press the ENTER button to confirm.
9 Press the SETUP button.
Note If you forgot your access code, enter 4737 , then enter
your new access code. The old access code is cleared
and the parental level is set to
ALL (default).
Note If you forgot your access code, enter 4737 , then enter
your new access code. The old access code is cleared
and the parental level is set to
ALL (default).