Insignia NS-19RTR User Manual
Page 33
32
NS-19RTR 19" DVD Triple Combo
www.insignia-products.com
To set up a future recording:
1 Press the SETUP button.
2 Press the
or
button to select TIMER PROGRAMMING
,
then
press the ENTER button.
If you have not set the clock, the MANUAL CLOCK SET menu
appears. Follow the instructions in “Manually setting the clock” on
page 19, then start this task again.
3 Press the
or
button to select the row you want to use, then
press the button.
4 Press the
or
button one or more times to select the channel
you want to record, then press the button.
If you are using a cable or satellite TV box, tune your DVD combo
to the access channel (usually 3 or 4), then use the cable or
satellite TV box to tune to the channel you want to record.
5 Press the
or
to select the date for the recording, then press
the
button.
•
For a one-time only recording, select the date.
•
For a weekly recording, select EVRY and the day of the
week.
•
For a daily recording, select EVRY DAY.
6 Press the
or
button to select beginning and ending hours
and minutes. Press the button to move from field to field.
7 Press the
or
button to select the tape speed. For more
information, see “Recording tips” on page 29.
8 Press the ENTER button.
9 To set up additional recordings, repeat Steps 3 through 8.
10 When you finish setting up recordings, press the SETUP button.
11 Insert a videotape that has an erase-prevention tab.
12 Press the POWER button to complete the setup. The recording
indicator lights. If the videotape does not have a tab, your DVD
combo ejects the tape and turns off.
Notes
You must turn off your DVD combo to activate
the future recording feature. If the power is not
turned off and you are watching TV, TIMER
REC STANDBY starts flashing on the screen
two minutes before the recording start time.
When the recording starts, the TV screen does
not turn on.
During the recording, you can only watch the
TV program being recorded or DVD playback.
If the tape runs out before the end of the
recording time, your DVD combo stops
recording and ejects the tape.