Insignia NS-19RTR User Manual

Page 27

NS-19RTR 19" DVD Triple Combo

www.insignia-products.com

Playing a videotape

To play a videotape:

1 Press the INPUT button one or more times to select TV/VCR.
2 Insert a pre-recorded tape in the videotape compartment.
3 Press the PLAY

button.

4 To control playback:

•

To rewind or fast-forward the videotape,

press the

SKIP/REW

or FWD/SKIP

button.

•

To stop playback, press the STOP

button.

•

o stop playback and eject the videotape, press the

STOP/EJECT

on the front panel.

•

To adjust tracking (when black or white streaks are on the
screen), press the CH

button during normal

playback, or during Pause, Still, or Slow modes. To stop
manual tracking, stop the videotape and restart it.

•

To freeze the picture, press the PAUSE–SLOW button.
Each time you press the button, the videotape advances
one frame. Press the PLAY

button to return to normal

playback.

•

To play the videotape in slow motion, press the
PAUSE–SLOW

button, then press the FWD/SKIP

button. To stop slow motion, press the

PLAY

button. After

five minutes of slow motion playback, your DVD combo
automatically returns to normal playback.

Improving playback picture quality

If you are playing a videotape that is old or worn, such as a rented
videotape, you can improve the picture quality.

To improve the picture quality:

1 Press the SETUP button.
2 Press the

button to select USER’S SET UP

then press

the ENTER button.

3 Press the

button to select RENTAL

then press the

ENTER button one or more times to select ON

4 Press the SETUP button to close the menu.
5 Press the PLAY

button to start playback.

Tip

If you are in DVD mode, you can start VCR
playback by pressing the PLAY button on the
VCR side of the front panel.

Note

Your DVD combo remembers this setting even if you turn off your
DVD combo.