Insignia NS-19RTR - Manual (Page 28)

27
NS-19RTR 19" DVD Triple Combo
www.insignia-products.com
Using Repeat mode
1 Press the SETUP button.
2 Press the
or button to select USER’S SET UP , then press
the ENTER button.
3 Press the or button to select REPEAT PLAY.
4 Press the ENTER button one or more times to select the Repeat mode
you want. You can select:
• ALL–Plays the entire videotape repeatedly.
• BLANK–Plays the videotape from the beginning of the tape
to the first blank spot on the tape that lasts 10 seconds,
then starts playback at the beginning again.
• OFF–Cancels Repeat mode.
5 Press the SETUP button to close the menu.
6 Press the PLAY
button to start playback.
Searching on a videotape
To mark a starting point for playback:
1 Rewind or fast-forward the tape to the starting point you want.
2 Press the CLEAR button repeatedly to set the counter to 0:00:00.
3 Press the PLAY
or REC button to start playback or recording.
4 Press the STOP button when playback or recording has
finished.
5 Press the SETUP button.
6 Press the
or button to select ZERO RETURN , then press the
ENTER button. Your DVD combo rewinds the tape to the starting
point (the counter shows 0:00:00) .
To search for a scene or skip a scene:
1 Start videotape playback.
2 Press the SKIP/REW
or FWD/SKIP button to scan
backwards or forwards. If you want to search faster, press the
SKIP/REW or FWD/SKIP button again.
3 Press the PLAY button to resume normal playback.
Notes Your DVD combo remembers this setting even if you turn off your
DVD combo.
If RENTAL is turned on, RENTAL PLAY appears. If RENTAL is
turned off, REPEAT PLAY appears.