Impex IGS 16 - Manual (Page 12)

STEP 5 (See Diagram 5)
A.) Place the Seat (#61) onto the Seat Incline Adjustment (#13). Secure it with two M10 x 1 ¾” Allen
Bolts (#101) and Ø ¾” Washers (#118).
B.) Insert the Seat Incline Adjustment into the opening on the Seat Support (#11). Use a Lock Knob
(#71) to secure the Seat at desired height.
C.) Insert a Foam Tube (#37) halfway through the hole on the Seat Incline Adjustment (#13). Push
two Foam Rolls (#62) onto the Tube from both ends. Push two Foam Roll End Caps (#90) into
the ends.
D.) Secure the Tube with one M6 x ¼” Socket Set Screw (#111).
E.) Attach the Front Stabilizer (#14) to the front opening on the Main Base Frame (#2). Secure it
with three M10 x ¾” Allen Bolts (#97) and Ø ¾” Washers (#118).
F.) Attach the Foot Plate (#31) to the Front Stabilizer. Secure it with two M10 x 1” Allen Bolts (#98),
Ø ¾” Spring Washers (#115), Ø ¾” Washers (#118), and Ø ½” Bushings (#46).
G.) Push two Stabilizer End Caps (#86) onto the Front Stabilizer (#14).
DIAGRAM 5
11