Impex MSS-1280 User Manual
Deluxe smith machine, Mss-1280, Model mss-1280
NOTE:
Please read all instructions
carefully before using this
product
Table of Contents
Safety Notice
Hardware Identifier
Assembly Instruction
Parts List
Warranty
Ordering Parts
Model
MSS-1280
Retain This
Manual for
Reference
08-03-09
OWNER'S
MANUAL
DELUXE SMITH MACHINE
MSS-1280
IMPEX
®
INC.
14777 DON JULIAN RD., CITY OF INDUSTRY, CA 91746
Tel: (800) 999-8899 Fax: (626) 961-9966
Table of contents
Document Outline
- BEFORE YOU BEGIN...................................................................................... 1
- IMPORTANT SAFETY NOTICES..................................................................... 2
- SMITH MACHINE HARDWARE PACK……….....….......................................... 4
- SMITH MACHINE ASSEMBLY INSTRUCTIONS...............................................6
- SMITH MACHINE EXPLODED DIAGRAM........................................................15
- SMITH MACHINE PARTS LIST…………………………………………………… 16
- BENCH HARDWARE PACK……….....…..................................................…….17
- BENCH ASSEMBLY INSTRUCTIONS......................................................…….19
- BENCH EXPLODED DIAGRAM...............................................................……. 24
- BENCH PARTS LIST……………………………………………………………….. 25
- WARRANTY.................................................................................................… 26
- ORDERING PARTS......................................................................................... 26
- CAGE MACHINE HARDWARE PACK
- SMITH MACHINE ASSEMBLY INSTRUCTION
- Note: Do not tighten the Nuts and Bolts until instructed to do so.
- Connect the two Base Frames (#3) by the Cross Brace (#7). Secure each end of the Cross Brace to each Base Frame with four M10 x 2 3/8” Carriage Bolts (#50), one 4 ¾” x 3 ¼” Bracket (#22), four Ø ¾” Washers (#57), and four M10 Aircraft Nuts (#58).
- Attach the Left Rear Support (#5) onto the left Base Frame. Secure it with two M10 x 3 ½” Allen Bolts (#55), four Ø ¾” Washers (#57), and two M10 Aircraft Nuts (#58). Repeat the same step to install the Right Rear Support (#6) onto the other Base Frame.
- STEP 6 (See Diagram 6)
- SMITH MACHINE EXPLODED DIAGRAM
- SMITH MACHINE PART LIST
- KEY NO. DESCRIPTION Q’ty
- BENCH PARTS LIST
- KEY NO. DESCRIPTION Q’ty