Impex DBR 92 User Manual
Apex, Tri-level dumbbell rack, Dbr 92
NOTE:
Please read all instructions
carefully before using this
product
Safety Notice
Hardware Identifier
Assembly Instruction
Parts List
Warranty
Ordering Parts
Model
DBR 92
Retain This
Manual for
Reference
07-4-06
OWNER'S
MANUAL
APEX
Tri-Level Dumbbell Rack
DBR 92
IMPEX
®
INC.
14777 DON JULIAN RD., CITY OF INDUSTRY, CA 91746
Tel: (800) 999-8899 Fax: (626) 961-9966
Table of contents
Document Outline
- BEFORE YOU BEGIN...................................................................................... 1
- IMPORTANT SAFETY NOTICES..................................................................... 2
- HARDWARE PACK……….....…....................................................................... 4
- ASSEMBLY INSTRUCTIONS........................................................................... 5
- EXPLODED DIAGRAM.........................................................................………. 8
- PARTS LIST...................................................................................................... 9
- WARRANTY.................................................................................................…. 10
- ORDERING PARTS.......................................................................................… 10
- HARDWARE PACK
- ASSEMBLY INSTRUCTION
- A.) Connect the Left & Right Upright Beams (#1 & #2) with one Dumbbell Rack (#5) on the top level. Align the holes then secure each end of the Rack with one M10 x 2 ¾” Allen Bolt (#12), two ( ¾” Washers (#9), and one M10 Aircraft Nut (#14). Repeat the s
- A.) Insert a Weight Post (#6) into the hole on the side of the Left Upright Beam (#1). Secure it with a M10 x 1 1/8” Allen Bolt (#11) and ( ¾” Washer (#9).
- Parts list
- KEY NO. DESCRIPTION Q’ty