IBM BDM-610000049 - Manual (Page 15)

BDM-610000049 Rev G Chapter 1: Introduction 5
Ordering Information
The CMX158886 cpuModule is available with a 1.4 GHz Pentium-M processor, or a 1.0 GHz Celeron-M processor
and 512 or 1024 MB of DDR SDRAM. The cpuModule can also be purchased as part of an Intelligent Data
Acquisition Node (IDAN™) building block, which consists of the cpuModule and a milled aluminum IDAN frame.
The IDAN building block can be used in just about any combination with other IDAN building blocks to create
a simple but rugged PC/104 stack. Refer to Appendix C,
IDAN™ Dimensions and Pinout, for more information. The
CMX158886 cpuModule can also be purchased as part of a custom-built RTD HiDAN™ or HiDAN plus High
Reliability Intelligent Data Acquisition Node. Contact RTD for more information on its high reliability
PC/PCI-104 systems.
CMX158886 Model Options
The basic cpuModule model options are shown below. Refer to the RTD website (www.rtd.com) for more
detailed ordering information.
Table 1 CMX158886 cpuModule Model Options
Part Number Description
CMX158886PX1400HR-512 1.4 GHz Pentium-M, 512MB DDR-SDRAM cpuModule
CMX158886PX1400HR-E512 1.4 GHz Pentium-M, 512MB DDR-SDRAM cpuModule with ECC
CMX158886PX1400HR-1024 1.4 GHz Pentium-M, 1024MB DDR-SDRAM cpuModule
CMX158886CX1000HR-512 1.0 GHz Celeron-M, 512MB DDR-SDRAM cpuModule
CMX158886CX1000HR-E512 1.0 GHz Celeron-M, 512MB DDR-SDRAM cpuModule with ECC
CMX158886CX1000HR-1024 1.0 GHz Celeron-M, 1024MB DDR-SDRAM cpuModule