Intermec CN2G - Manual (Page 71)

Chapter 3 — Developing and Installing Applications
CN2G Handheld Computer User’s Manual 59
For more information on using Wavelink Avalanche, contact
your local Intermec representative or visit the Wavelink web site
at www.wavelink.com.
Launching Your Application Automatically
To launch your application automatically on the CN2G every
time you perform a warm or cold boot, make sure your CAB file
places a shortcut to your application in the \Windows\StartUp
folder.
Upgrading Your CN2G
When you upgrade your CN2G, you are updating these two
components:
• Operating system (OS)
• Persistent Storage Manager (PSM) files
Upgrading the Operating System
When you upgrade the operating system, you erase the current
configuration and replace it with the new default configuration.
You will need to set the network communications parameters on
the CN2G to reestablish communications with the other devices
in the wireless network.
There are two ways to upgrade the OS:
• You can upgrade your computer using an SD card.
• You can remotely upgrade your computer using Intermec
Settings.
Upgrading the Operating System Using an SD Card
To upgrade the OS, you need:
• an SD card formatted as FAT16.
• an SD card reader.
• the latest upgrade ZIP file. This file is available from the
Intermec web site at www.intermec.com. Go to Service &
Support > Downloads. Make sure the file you select is for
your language and that it has an SD at the end of the file
name.