Configuring 802.1x security with funk security – Intermec CN2G User Manual
Page 54
Chapter 2 — Configuring the CN2G
42
CN2G Handheld Computer User’s Manual
Configuring 802.1x Security With Funk Security
1
Make sure you have configured the communications and
radio parameters on your CN2G.
2
Make sure you have selected Funk as your security choice.
3
If you plan to use TLS for authentication, load a user and
root certificate on your CN2G. For help, see “Loading
Certificates” on page 47.
4
Open Intermec Settings.
5
Choose Communications > 802.11 Radio > Security
Settings > Funk Security > Profile.
6
For Association, tap Open and tap Save.
7
For Encryption, tap WEP and tap Save.
8
For Authentication, tap TTLS, PEAP, or TLS and tap Save.
If you choose TTLS or PEAP:
a
Select User name, type your user name, and then tap
Save.
b
Select Password prompt, choose Enter password now,
and then tap Save.
Note: You can use Prompt for password to troubleshoot
your connection to the network if you have problems.
c
Select User Password, type a user password, and then tap
Save.
d
For Validate Server Certificate, choose Enabled and tap
Save.
If you choose TLS:
a
For Validate Server Certificate, choose Enabled and tap
Save.
b
You can also enter a User Name, Subject Name and
Server Common Name if you want to increase your level
of security.
9
Exit Intermec Settings.