Intermec CN2G - Manual (Page 46)

Chapter 2 — Configuring the CN2G
34 CN2G Handheld Computer User’s Manual
Note: If you are using 802.1x security, this section assumes that
your authentication server and authenticators are properly
configured. For more information on the different types of
security, see the MobileLAN™ secure 802.1x Security Solution
Installation Guide (P/N 073134) available at
www.intermec.com.
Choosing Between Microsoft and Funk Security
Before you can implement a security solution on the CN2G,
you need to choose between Microsoft and Funk security
software:
• Microsoft security is the default setting. If you choose
Microsoft, you can begin implementing your WPA, 802.1x,
or WEP security solution now.
• Funk security provides everything you get with Microsoft
security with the addition of CCX v1.0 compliance. Funk
security also enables you to use LEAP and TTLS
authentication on your CN2G. If you choose Funk security,
you need to:
a select Funk security as your security choice.
b select a profile.
Note: Your choice does not depend on your authentication
server. For example, you can choose Funk security if you use
Microsoft Active Directory
® to issue certificates.
Selecting Funk as Your Security Choice
The default security setting is Microsoft. If you want to use
Funk security, you need to select it as your security choice.
To select Funk security as your security choice
1 Tap the Start icon. The Start menu appears.
2 Select Intermec Settings. The Intermec Settings application
appears.
3 Select Communications > 802.11 Radio > Security Settings
> Security Choice.