Intermec CN2G - Manual (Page 35)

Chapter 2 — Configuring the CN2G
CN2G Handheld Computer User’s Manual 23
Configuring the CN2G With the Setup Assistant
The Setup Assistant runs on the CN2G the first time you turn
on the computer. Use the Setup Assistant to set or enable basic
network parameters and connect your CN2G to the network.
The Setup Assistant guides you through setting the following
basic network parameters:
• Date and time
• 802.11b/g radio and SSID (Network name)
• 802.1x security
• DHCP server or IP address, subnet mask, and default router
• Primary and secondary DNS addresses
• Primary and secondary WINS addresses
• Device name
To set other parameters, use Intermec Settings or another
configuration method.
The Setup Assistant Start Screen
After you complete the Setup Assistant, the CN2G should be
communicating with your network. A network connection icon
appears on your taskbar. For more information on the network
icons, see “Understanding the Screen Icons” on page 13.