Intermec CN2G User Manual
Page 43
Chapter 2 — Configuring the CN2G
CN2G Handheld Computer User’s Manual
31
To use wireless communications in a TCP/IP network
1
Configure these network parameters on each CN2G in the
network:
• Infrastructure mode (set to Infrastructure by default)
• Network name (SSID)
• Host IP address
• IP settings (if not using DHCP)
• Network port
2
Configure security. For help, see “Configuring Security” on
page 33.
The easiest way to configure the network parameters on the
CN2G is to use Intermec Settings. For help, see “Configuring
the CN2G Locally With Intermec Settings” on page 24.