Intermec CN2G User Manual
Page 17
Chapter 1 — Using the CN2G Handheld Computer
CN2G Handheld Computer User’s Manual
5
Battery
4
Replace the battery door.
5
Connect the AC power supply (P/N 074246) to the power
connector on the back of the CN2 communications dock
(P/N 074248), and then connect the power cord to the AC
power supply.
AC power
supply
Communications
dock
Power
light
ENTER
CN2
ESC
6
Connect the power cord to an AC power outlet. The green
Power light on the communications dock turns on.
7
Place the CN2G in the communications dock. The battery is
fully charged in approximately 4 hours.
For more information, see the instructions that ship with the
communications dock.