Intermec CN2G User Manual
Page 23
Chapter 1 — Using the CN2G Handheld Computer
CN2G Handheld Computer User’s Manual
11
To enable or disable symbologies
1
From the ScanDemo window, tap the Symbologies button
to see the symbologies that are enabled.
2
Select or clear the symbologies you want to use and tap Back.
3
If you want to configure symbology parameters, tap Intermec
Settings. Intermec Settings appears on your screen.
4
From the Intermec Settings application, go to Scanners,
Symbologies > Internal Scanner > Symbologies.
5
Select a symbology and modify its parameters.
6
Save your settings and close Intermec Settings. The Scanner
Symbologies window appears.