Intermec CN2G - Manual (Page 49)

Chapter 2 — Configuring the CN2G
CN2G Handheld Computer User’s Manual 37
• a CN2G with the 802.11b/g radio and the 802.1x/WPA
security option.
Configuring WPA Security With Funk Security
Use these procedures to set WPA-802.1x and WPA-PSK
security on your CN2G with Funk security.
To enable WPA-802.1x security on your CN2G with Funk security
1 Make sure you have configured the communications and
radio parameters on your CN2G.
2 Make sure you have selected Funk as your security choice.
3 If you plan to use TLS for authentication, load a user and
root certificate on your CN2G. For help, see “Loading
Certificates” on page 47.
4 Open Intermec Settings.
5 Choose Communications > 802.11 Radio > Security
Settings > Funk Security > Profile.
6 For Association, choose WPA and tap the Save icon in the
upper right corner of the window. Encryption is set to TKIP
by default.
7 For Authentication, choose TTLS, PEAP, or TLS and tap
Save.
If you choose TTLS or PEAP:
a Select User name, select the text in the text box, use the
input panel to type your user name, and tap Save.
b For Password prompt, make sure that Enter password
now is selected.
Note: You can use Prompt for password to troubleshoot
your connection to the network if you have problems.
c Select User Password, select the text in the text box, use
the input panel to type your user password, and tap Save.
d For Validate Server Certificate, choose Enabled and tap
Save.