IBM F50 RS/6000 7025 - Manual (Page 20)

Before You Begin
Make sure you have an adequate number of properly grounded electrical outlets
for your system, display, and any other options you intend to install.
Place your system in a location that is dry. Rain or spilled liquids might damage
your system.
Always operate your system in the upright position and do not place any heavy
objects on top of your system.
Leave about 51 mm (2 in.) of space on all sides of the system to allow the
system's cooling system to work properly.
Collect the following tools, and keep them handy:
– Small flat-blade screwdriver
– Medium flat-blade screwdriver
– Trays to hold screws
Before continuing, refer to the System Unit Safety Information book for Danger
and Caution notices. Do not plug any cables into system unit, adapters, or
electrical outlets until you have reviewed this information.
Make sure none of the power cords are connected before continuing.
1-2 IBM RS/6000 7025 F50 Series User's Guide