IBM F50 RS/6000 7025 - Manual (Page 170)

b. Insert the memory module into the next unused memory module connector.
Ensure that the tabs are in the unlocked position, as shown, prior to memory
module insertion. After insertion, the tabs should be in the locked position
(up).
Attention: Inserting the memory-modules diagonally may damage the
memory-modules.
5. Go to “Device Records” on page A-2 to record the size of the memory-modules
and the connector into which it is installed; then return here to determine your
next step.
6. Replace the memory card, see “Installing or Adding Memory Adapter Cards” on
page 5-20.
7. If you have other procedures to perform, refer to “Option List” on page 5-17.
5-26 IBM RS/6000 7025 F50 Series User's Guide