IBM 09-0572-000 - Manual (Page 74)

A-4 A PPENDIX A: U SING THE C ONFIGURATION AND D IAGNOSTIC P ROGRAM
Using the File Options
The File Options are located in dialog boxes on the Run Tests,
Test Setup, and Configure Adapter screens. The options are:
■
Load: loads a file from a selected directory.
■
Save: lets you save the currently displayed information to a file.
■
Print: prints the information currently displayed on the screen.
■
Cancel: lets you cancel the present operation.
Help
If you need additional information about any item in the
Configuration and Diagnostic Program, press [F1] to display
the help screen. Use the [PgDn] and [PgUp] keys or the arrow
keys to scroll through the help screens.
Tab to the command button and press [Enter] to
see the list of help screens included in the program.
The on-line help also describes the different parts of the
dialog boxes. The Test Setup dialog box is shown in
Figure A-2.
Figure A-2 Sample Dialog Box
Configuration and Diagnostic Program
Install Quit View Select
Test Setup
F1=Help
[ ↑↓ ]=Select a Test Group to View
[Alt]+=Execute Function
[TAB]=Next Field [SHIFT+TAB]=Previous Field [F1]=Help [ESC]=
Test
D efaults
F ile Options... O K C ancel
E n able Group D i sable Group
Group 1
Group 2
Group S elect
R epetitions
(.) [1 ]Times
E rrors
[X] Halt on Error
MMIO Register Write/Read Test
Boot PROM Test
AIP Checksum Test
Shared RAM Boundary/Domain Test
Shared RAM Write/Read Test
Open Adapter for Ring Operation Test
Ring Operations Test
Close Adapter Test *Enabled
*Enabled
*Enabled
*Enabled
*Enabled
*Enabled
*Enabled
*Enabled
G roup 1 Tests
Continuous
Dialog box
List
box
On-screen
command
help
Check
box
Radio
buttons
List
box
Command
buttons