beautypg.com

Connecting to shielded twisted-pair (stp) cable, 1 locate the adapter’s db-9 connector on the backp, Figure2-5 attaching the stp cable with the db-9 c – IBM 09-0572-000 User Manual

Page 26: 2 locate the db-9 connector on the shielded twiste, 3 connect the cable’s db-9 connector to the adapte, 4 connect the other end of the cable to a network

background image

2-8

C

HAPTER

2: I

NSTALLING

THE

3C619C A

DAPTER

Connecting to Shielded Twisted-pair (STP) Cable

1 Locate the adapter’s DB-9 connector on the backplate, as

shown in Figure 2-5.

Figure 2-5 Attaching the STP Cable with the DB-9 Connector

2 Locate the DB-9 connector on the shielded twisted-pair

cable.

3 Connect the cable’s DB-9 connector to the adapter’s DB-9

port, and secure it by tightening the two screws.

4 Connect the other end of the cable to a network dual

access unit (DAU), a multistation access unit (MAU), or a
controlled access unit (CAU).

If you have a NetWare server, proceed to Chapter 3. If you
have any other type of network operating system, proceed to
Chapter 4.

4 16

DB-9 port

DB-9

connector

See also other documents in the category IBM Hardware: