IBM 09-0572-000 - Manual (Page 25)

Connecting to the Network 2-7
Figure 2-4 Installing the Adapter
Connecting to the Network
Connect one of the following types of network cables to the
3C619C adapter.
TokenLink III adapters support industry-standard token ring
type 3 (UTP) or types 1 or 6 (STP) cabling. These types of
cable follow IEEE 802.5 specifications.
CAUTION: Make sure that you connect the cable only to the
3C619C adapter that you have just installed. Connecting the
cable to any expansion card other than the network adapter
could result in serious damage to the expansion card or the
token ring network.
Figure 2-5 and Figure 2-6 show the adapter connectors.
Type Connector
Shielded twisted-pair (STP) cable DB-9
Unshielded twisted-pair (UTP) cable RJ-45