4 at the prompt, enter a path for the destination, 5 exit to dos and follow the instructions in the n, Updating the pc startup files – IBM 09-0572-000 User Manual
Page 44: 1 modify the autoexec.bat file to include the foll, 2 edit your config.sys file and include the follow, 3 reboot your pc, Updating the pc startup files 5-4
5-4
C
HAPTER
5: I
NSTALLING
N
ETWORK
D
RIVERS
4 At the prompt, enter a path for the destination of the
driver, or accept the default.
5 Exit to DOS and follow the instructions in the next section
to make the necessary changes to your AUTOEXEC.BAT
and CONFIG.SYS files.
Refer to Novell’s NetWare ODI Shell for DOS or Novell’s
Workstation for DOS and Windows guide for more detailed
information concerning other protocols and frame types.
Make sure to use the latest Novell files. Obtain these from the
Novell forum on CompuServe
or your authorized reseller.
Updating the PC Startup Files
1 Modify the AUTOEXEC.BAT file to include the following
commands:
LSL
3CTOKEN
IPXODI
VLM
F:
LOGIN
2 Edit your CONFIG.SYS file and include the following
statements:
Files=
Buffers=
Lastdrive= Z
Novell recommends that
statement.
3 Reboot your PC.
This completes the manual NetWare DOS ODI client driver
installation.