IBM 09-0572-000 - Manual (Page 55)

Installing the Network Driver for Windows 95 6-3
5 From the Select Network Component Type dialog box,
double-click Adapter.
6 From the Select Network Adapters dialog box, click
Have Disk.
7 Insert the TokenDisk diskette in the floppy drive.
8 In the Copy Manufacturer’s Files From selection box, type
the following:
A:\WIN95
9 Click OK.
10 In the Models selection box, highlight the correct adapter
(either ISA or EISA).
■
Choose 3Com TokenLink III ISA (3C619B, 3C619C) in EISA
mode if you installed the adapter in an EISA slot and used
the EISA configuration utility to configure the adapter.
■
Choose 3Com Token Link III ISA (3C619B, 3C619C) if you
installed the adapter in an ISA slot. You may also make
this selection if the adapter is in an EISA slot with
AutoSwitch disabled.
TokenLink III ISA Adapter appears in the selection box.
11 Click OK.
12 From the Network dialog box, click OK.
13 In the Resources screen, click OK to accept the I/O base
address.
14 Remove the diskette.
15 Click Yes to restart your PC to activate the driver.
This completes the installation of the 3Com NDIS 3.0 driver
for Windows 95.