IBM 09-0572-000 - Manual (Page 22)

2-4 C HAPTER 2: I NSTALLING THE 3C619C A DAPTER
Taking Safety Precautions
WARNING: The adapter board is installed in a PC that
operates with voltages that can be lethal. Before you remove
the cover of your PC, you must observe the following steps to
protect yourself and prevent damage to the PC’s components.
1 Turn off the PC and unplug the unit from its power source.
2 Remove any jewelry from your hands and wrists.
3 Make sure to use only insulated or nonconductive tools.
Inspecting the Adapter
The contents of your 3C619C adapter package are listed below.
If any of these items are missing, contact your authorized
network supplier immediately.
■
TokenLink III 16-bit ISA adapter (3C619C)
■
TokenLink III 16/4 ISA Adapter User Guide
■
TokenDisk diskette for the TokenLink III family of adapters
CAUTION: The adapter is packed in an antistatic container
to protect it during shipment. To avoid damaging highly
static-sensitive components on the adapter or in the PC, be
sure to reduce any static electricity on your body. You can also
maintain grounding by wearing an electrostatic discharge
wrist strap attached to the chassis.
1 Carefully lift the adapter out of the box and set it aside.
2 Return all packing materials to the shipping container and
store the container in a safe place.
If you need to return the adapter to 3Com, you must pack it
in the original (or equivalent) packing material, or the
warranty will be voided.
3 Remove the adapter from its antistatic bag.