IBM Infoprint M22 MFP - Manual (Page 54)

Notices
The following notices apply to machine type
4036-302.
The following telecommunications notices apply to
those machines in which the print server is
installed.
Electronic emission notices
Warning: This is a Class A product. In a domestic
environment, this product may cause radio
interference, in which case the user may be
required to take adequate measures.
FCC Rules -- Part 15
The print server has been tested and found to
comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules (Federal
Communications Commission).
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
The FCC Class A limits are designed to provide
reasonable protection against harmful interference
when the equipment is operated in a commercial
environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not
installed and used in accordance with the
instruction manual, may cause harmful interference
to radio communications. Operation of this
equipment in a residential area is likely to cause
harmful interference, in which case the user will be
required to correct the interference at his own
expense.
The manufacturer is not responsible for any radio
or television interference caused by using other
than recommended cables or by unauthorized
changes or modifications to this equipment.
Unauthorized changes or modifications could void
the user's authority to operate this equipment.
Industry Canada ICES-003
This Class A digital apparatus complies with
Canadian ICES-003.
Avis de conformité aux normes de l’industrie du
Canada
Cet appareil numérique de la classe A respecte
toutes les exigences du Règlement sur le matériel
brouilleur du Canada.
Telecommunications notices
FCC rules Part 68
This equipment complies with Part 68 of the FCC
Rules. A label on the back of the equipment shows
its FCC registration number and ringer equivalence
number (REN).
Your telephone company may ask you for these
numbers in order to determine how many devices
may be connected to your telephone line (in most
areas, no more than five). If too many RENs are
assigned to your telephone line, this device may not
ring in response to an incoming call. Contact the
telephone company to determine the maximum
RENs for your calling area.
This equipment uses an RJ-11C Universal Service
Order Code (USOC) jack, and is designed to be
connected to the telephone network or premises
wiring using a compatible jack that is FCC Part 68
Notices
48