IBM Infoprint M22 MFP - Manual (Page 32)

Step 6: Attach cables and power
cords
Attaching cables
to the printer
Note: Germany: Use only
the German TAE type F
adapter shipped with this
product because it contains
a billing tone filter. The
adapter is designed only for
the F connector of the
German wall outlet. This
must be the only device
attached to the NFN wall
receptacle.
Switzerland: Use only the
Swiss adapter shipped with
this product because it
contains a billing tone filter.
Connect the printer to the telephone line, network, and MFP.
1
Connect the RJ-11 telephone fax line cable into the fax modem
port on the back of the print server installed in your printer.
2
If you received a telephone adapter specifically designed for
use in your country, attach the telephone adapter to the
telephone fax line cable and plug the fax line cable into the
phone line outlet.
3
Connect the Ethernet cable into the Ethernet network port on
the back of the print server installed in your printer.
4
Connect the scanner cable to the printer, but do not turn the
power on yet.
Scanner cable
Ethernet
network cable
Telephone fax line
cable (RJ-11)
Attach cables and power cords
26