IBM Infoprint M22 MFP - Manual (Page 28)

3
Remove the top cover or any previously installed print media
handling options from the printer.
You will not need the cover when the scanner shelf is attached.
Store the cover, it will be needed if you remove the shelf.
4
Align and insert the scanner shelf mounting brackets into the
slots on top of the printer.
5
Make sure the scanner shelf is positioned securely.
6
Place the tips of the wire bail into the ends of the plastic
brackets so that the bail curves downward.
The wire bail came with the printer and rests in the standard
output bin when installed.
Set up the printer
22