Motorola BACKFLIP 68014710001-A - Manual (Page 32)

Bluetooth® Wireless 30
Bluetooth® Wireless
Quick Start: Bluetooth Wireless
Find it: Menu > Settings > Wireless controls >
Bluetooth settings
Turn Bluetooth Power On or Off
Find it: Press and hold Power > Bluetooth
Note: To extend battery life, turn Bluetooth power
off when not in use.
Bluetooth devices
Bluetooth settings
(#########) 38.4 MHz Class 1.5
Device name
Pair with this device
(found device name)
Make device discoverable
Discoverable
Scan for devices
Bluetooth Turn on & scan
Re-scan
Connect
Connect New Devices
Note: This feature requires an optional accessory.
To connect with a new device, you need to pair with it.
You only need to do this once for each device—to
connect again, just turn on the device.
1 Make sure the device you are pairing with is in
discoverable mode.
Note: Refer to the guide that came with the device
for details.
2 Touch Menu > Settings > Wireless controls >
Bluetooth settings.
3 Touch Bluetooth to turn on and scan. If Bluetooth
power is already on, touch Scan for devices.
4 Touch a device to connect.
5 If necessary, touch OK, or enter the device passkey
(like 0000) to connect to the device. When the device
is connected, the Bluetooth indicator
appears in
the status bar.
Note: Using a mobile device or accessory while driving
may cause distraction and may be illegal. Always obey
the laws and drive safely.