Motorola WA840G - Manual (Page 56)

CONFIGURATION SECTION 3
WA840G 3-19
Field Description
Subnet Mask Displays the access point’s Subnet Mask
address used to connect to your network.
If DHCP is selected, this is the Subnet Mask
Address that your access point is currently
using to access the Internet. If using Static
Assigned, enter the Subnet Mask Address here.
Gateway IP Displays the access point’s Gateway IP
Address used to connect to your network.
If DHCP is selected, this is the Gateway IP
Address that your access point is currently
using to access the Internet. If using Static
Assigned, enter the Gateway IP Address here.
Apply Click to save your settings.
Cancel Click to cancel any changes.
Configuring Device Security
This screen allows you to change your User ID and Password and
adjust the inactivity time.
To access the screen, click Control Panel > Device Security.
Field Description
Login User ID Changes the User ID used for logging into
the access point’s Configuration Utility. It
cannot be longer than 63 bytes. A blank user
name is not allowed. The default is admin.