Motorola WA840G - Manual (Page 16)

OVERVIEW SECTION 1
WA840G 1-11
Feature Description
Reset Button Resets your access point or resets the access
point to the default login settings.
If the access point experiences trouble
connecting to the Internet, briefly press and
release the Reset button to reset the access
point. This retains the access points
configuration information.
To reset the access point to the factory defaults,
while the access point is powered, press and
hold the Reset button for more than 5 seconds.
This clears the access point’s user settings,
including User ID, Password, IP Address, and
Subnet Mask. To re-configure the access point,
see Section 3: Configuration.
Antenna The antenna used for wireless connections. You
are able to rotate and tilt the antenna to gain the
best signal reception.
Front of Access Point
The following illustration shows the WA840G front panel:
Po
we
r
Wi
rel
es
s
De
vic
e
1 2 3
The access point LEDs indicate its operational status.