Motorola WA840G - Manual (Page 17)

SECTION 1 OVERVIEW
1-12 WA840G
LED Description
The underlined items represent network activity.
LED Condition Color Status
1 Power ON Green The device is powered on and operating normally.
Blinking Green Firmware update is in progress.
Blinking/ON Red The power LED turns RED as soon as the reset
button is depressed. If the reset button is held down
for more than 5 seconds, the LED starts to blink
during which the access point’s default user name,
password and IP address will be restored. The LED
then turns OFF until the reset button is released. The
power LED blinks RED if the firmware is corrupted
indicating the firmware needs to be restored.
2 Wireless OFF None No mobile station or access point has been
associated with this device.
ON Red The wireless interface has been disabled by the
firmware.
ON/Blinking Green 802.11b/802.11g connection exists in this wireless
domain/active traffic present.
3 Device OFF None No external Ethernet device has been attached and
detected. The Ethernet link is down.
ON/Blinking Amber 10BaseT link detected/active traffic present.
ON/Blinking Green 100BaseT link detected/active traffic present.